Find the voltage v1 and the currents I1 and I2 for the circuit shown. To solve this problem first find the total current going through the 14 ohm resistor. To do this find the effective resistance of ...

Two lamps connected in series with an open switch and a cell The circuit diagram shows a circuit with two lamps connected in series. If one lamp breaks, the other lamp will not light. The current is ...

The two resistors may have fixed values or one may be an LDR, a thermistor or other input device. The supply voltage is divided in the ratio of the resistances in the voltage divider. For the voltage ...

Many circuit techniques can generate bipolar supply voltages from a single positive voltage, but most of them require multiple inductors. In Figure 1, a single inductor and three Schottky diodes ...

Alternating current (ac) or direct current (dc) circuits are capable of carrying very different currents, as illustrated by the ratings on the switch in Figure 1. This is why it’s so important for ...

Designs that need to measure small signals riding on high-voltage power rails suggest the use of isolation devices. However, a high-common-mode-voltage instrumentation amplifier used with a ...